Filter
Top Products
18
Battery Low
If the handset battery is low, the unit will emit the alert tone and show BATTERY LOW
in the display to remind you that the battery needs charging. If the battery voltage is
very low, the handset will automatically shut down. Place handset in the charge cradle
to recharge battery.
Paging All Extension from the Cordless Handset
In the standby mode, press the Int/Transfer button and then press zero (0) button
twice to activate page all extensions function.
Paging the Cordless Handset
This feature helps you locate a misplaced handset.
Press the Page button once on the base, then press number 0 button. The cordless
handset will beep continuously (if it is not out of range) for 2 minutes or until you
press any button on the handset.
NOTE: You may still page the cordless handset even if the ringer is turned off.
Intercom Operation
Answering an Intercom Call
1. Press the Int/Transfer button or Talk button.
2. When finished, press the Int/Transfer button or End button again.
Receiving an Incoming Telephone Call During an Intercom Call
During an intercom call, if you receive a telephone call, you will hear an alert tone. To
answer the incoming call, press the Hold button to place your intercom call on hold
or press End or Int/Transfer button to drop the intercom call, then press Talk to answer
the telephone call.
Using Intercom with a Telephone Call
During a telephone call, you can use the intercom function to page another extension
unit and set up a private (2-way) intercom conversation with another user while the
telephone call is placed on hold. Or, you can create a 3-way conversation between the
telephone caller, the cordless handset and other extensions.
Intercom Operation