Filter
Top Products
18
6. Use the 5 or 6 to scroll to desired code #.
7. Press Sel/Save.
8. Use the touch-tone pad to enter the code. Press DELETE to clear and re-enter all three
digits.
9. When finished, press Sel/Save to save and return to CODE # x.
Flash Time
Depending on the services you have with the phone company, you may need to adjust the
flash timing. It can be set to 100ms or 600ms. The default is 600ms.
1. Press the MENU button.
2. Use the 5 or 6 to scroll to PHONE SETTING.
3. Press Sel/Save.
4. Use the 5 or 6 to scroll to FLASH TIME.
5. Press Sel/Save.
6. Use the 5 or 6 to scroll to the desired setting.
7. Press Sel/Save to save. To start over, press EXIT to return to the FLASH TIME menu.
New Call Indicator
1. Press the MENU button.
2. Use the 5 or 6 button to scroll to PHONE SETTING.
3. Press Sel/Save.
4. Use the 5 or 6 button to scroll to NEW CALL LED.
5. Press Sel/Save.
6. Use the 5 or 6 button to select on or off.
NOTE: If you select ON, the New Call Indicator will flash after the phone receive a new caller ID. If it is
OFF, the New Call Indicator will stay at off status even a new caller ID is received.
7. Press Sel/Save to save. To start over, press EXIT to return to the NEW CALL LED menu.
Connections and Setup