Filter
Top Products
15
AREA CODE
If you enter a 3-digit area code in the area code menu, your local area code
will not appear in Caller ID messages you receive. Instead, you will see
only the local seven digit number. Calls you receive from outside your
local area code will show the full ten-digit number.
This setting may be made with the handset or the base.
1. Make sure your handset or base is at the main menu. If your handset or
base is not in the menu mode, press the MENU soft key.
2. Press the cid/vol (up or down arrow) button on the handset or the CID
(up and down arrow) button on the base to scroll to
AREA CODE
.
HANDSET DISPLAY BASE DISPLAY
3. Press the OK soft key and
SET AREA CODE
- - - shows in the display. - - -
is the default setting.
4. Use the touch tone pad on your base or handset to enter your three digit
area code.
5. Press the OK soft key to save your selection and return to the main
menu. The selected area code displays for two seconds.
NOTE: Press the EXIT soft key once to keep the previous setting and return to
the main menu.
LANGUAGE
OK
AREA CODE
EXIT
SET AREA CODE
OK
- - -
EXIT
AREA CODE - 317
RINGER TONE
OK
AREA CODE
EXIT