Filter
Top Products
5
Follow these steps to mount the CB us-
ing the supplied hardware.
1. Using the mounting bracket as a
template, mark the positions for the
screw holes on the mounting sur-
face.
2. In each marked position, drill a hole
slightly smaller than the supplied
mounting screws.
Caution:
Be careful not to drill into
objects behind the mounting sur-
face.
3. Using a Phillips screwdriver, attach
the mounting bracket to the mount-
ing surface with the supplied screws
and lock washers.
4. Attach the CB to the mounting
bracket using the supplied rubber
washers and mounting knobs.
CONNECTING THE
MICROPHONE
1. Align the slot on the bottom of the
microphone’s plug with the ridge
inside the microphone jack. Then
fully insert the plug into the jack.
2. Turn the plug’s locking nut clockwise
to tighten it.
3. Slide the microphone onto the
microphone holder.
21-1709.fm Page 5 Monday, January 29, 2001 10:29 AM