Filter
Top Products
11
Follow these steps to charge nickel-
cadmium batteries in the TRC-235.
1. If the TRC-235 is on, turn
OFF/VOLUME
fully counterclockwise until it clicks to
turn it off.
2. Set
ALKALINE/NI
–
CD
inside the bat-
tery compartment to
NI
–
CD
(see “Us-
ing the Power Jack and Alkaline/NI-
CD Switch” on Page 6).
3. Connect the battery charger’s barrel
plug to the
POWER
jack on the side
of the TRC-235, then plug the bat-
tery charger’s plug into a standard
AC outlet.
It takes about 20 hours to charge
new or fully discharged nickel-
cadmium batteries. Subsequent
charges take about 14 to 16 hours.
21-1620.fm Page 11 Thursday, August 5, 1999 11:16 AM