Filter
Top Products
6
• Never leave dead, old, or weak non-
rechargeable batteries in the transceiver.
They can leak chemicals and corrode or dam-
age electronic circuits.
• Do not expose batteries to extreme heat or
fire. They might explode and cause personal
injury or damage equipment.
4. Position the
NI/AL
switch to match the battery
type.
•
NI
: for rechargeable nickel-cadmium batter-
ies (see “Charging Nickel-Cadmium Batter-
ies”).
•
AL
: for standard or alkaline batteries.
5. Install nine fresh non-rechargeable batteries or
nine nickel-cadmium batteries as indicated by
the polarity symbols (+ and –) marked inside the
battery compartment.
Cautions:
• Improper installation (incorrect polarity) might
damage the transceiver.
• Use only fresh batteries of the required size
and type. Never mix new and old batteries or
rechargeable and non-chargeable batteries in
the transceiver.
illustration
illustration
21-1678.fm Page 6 Thursday, August 5, 1999 12:45 PM