Filter
Top Products
12
Memos are stored with incoming mes-
sages and are replayed the same way
(see “Playing Messages”).
Follow these steps to record a memo.
1. Hold down
PLAY
until the TAD
beeps.
2. Speak your memo from about 8
inches in front of the TAD.
3. When you finish, press
STOP
. The
TAD beeps and is ready to answer
messages.
CHANGING THE REMOTE
OPERATION SECURITY
CODE
The TAD’s remote operation security
code is preset to 779. Follow these
steps to change it to a number from 000
to 999.
Notes
:
• Be sure to complete each step
within 8 seconds. Otherwise, the
TAD sounds three beeps and exits.
Start over at Step 1.
• If AC power fails or if the backup
battery becomes weak, the remote
operation security code automati-
cally resets to 779.
1. Use a pointed object, such as a
straightened paper clip, to hold
down
CODE
until the TAD-779
beeps and announces the first digit
of the current security code.
2. Repeatedly press
SKIP
or
REPEAT
to set the first digit, then press
STOP
.
The TAD beeps and announces the
second digit.
3. Repeatedly press
SKIP
or
REPEAT
to set the second digit, then press
STOP
. The TAD beeps and
announces the third digit.
4. Repeatedly press
SKIP
or
REPEAT
to set the third digit, then press
STOP
.
The TAD beeps once and
announces the complete remote
operation security code.
To check the remote operation security
code at any time, press
CODE
. The TAD
announces the currently set security
code.
Illus. showing
CODE switch.
43-779.fm Page 12 Monday, August 16, 1999 7:34 AM