Filter
Top Products
17
TELEPHONE OPERATION
MAKING AND RECEIVING
A CALL
To make a call, lift the handset and press
TALK
. When you hear the dial tone, dial
the desired phone number or memory
number (see “Memory Dialing” on
Page 19).
To answer a call if the handset is on the
base, simply lift the handset and begin
your conversation. If the handset is away
from the base, press
TALK
. The TALK in-
dicator on the handset and the IN USE
indicator on the base light.
To end a call, press
TALK
on the handset
or place the handset on the base. The
TALK and the IN USE indicators turn off.
Note:
If you press
TALK
to hang up and
the phone does not disconnect, place
the handset on the base.
SETTING THE HANDSET’S
VOLUME
You can change the handset’s volume
during a call by repeatedly pressing
VOLUME
. The volume steps up and
down the three settings (low, medium,
and high) and remains set for subse-
quent calls.
Note
: The TAD-732 sounds a few beeps
when it reaches the lowest or the high-
est volume setting.
CHANGING THE
CHANNEL
The TAD-732 has 20 channels (frequen-
cy pairs used between the base and
handset). It automatically selects a clear
channel each time you make or receive
a call.
If you hear other conversations or ex-
cessive noise during a call, press
CHAN-
NEL
on the handset to select a different
channel.
Note
: If the handset is too far from the
base, the channel might not change.
Move closer to the base and try again.
43-732.fm Page 17 Friday, August 13, 1999 1:42 PM