Filter
Top Products
16
For Line 2 only
MOUNTING THE SYSTEM
You can place the System 2100 directly on a desk, shelf, or
table, or mount it on a wall using the supplied mounting
bracket and screws.
Follow these steps to mount the system on a wall.
1. Select a location near the phone line jack(s) and mark
mounting screw locations 4
3
/
16
inches (106 mm) apart
on the wall, side-by-side.
2. Drill two
1
/
8
-inch holes in the wall at the marked loca-
tions.
Note: For extra support, use the supplied wall anchors.
3. Thread a screw into each hole until the head extends
1
/
8
inch from the wall.
43-982.fm Page 16 Monday, August 16, 1999 5:01 PM