Radio Shack ET 1754 Telephone User Manual


 
9
Operation
USING THE DATA PORT
The phone is equipped with an extra phone
jack that allows you to connect a communi-
cation device (a computer modem, answer-
ing machine, or fax machine) to Line 2.
Connect a line cord (not supplied) from the
communication device to
DATA
on the back
of the phone.
Note:
You cannot use Line 2 while a comput-
er modem or fax machine is connected to
DATA
and in use. Line 1 still functions nor-
mally. When you are finished using the mo-
dem or fax machine, Line 2 becomes
available again.
The USOC number of the data jack to be in-
stalled is RJ11.
SWITCHING BETWEEN
LINES
Making a Call on Another Line
1. Press
HOLD
to place the first call on
hold.
2. Press the
LINE
not in use, then dial the
desired number.
3. Press the first call’s
LINE
at any time to
return to the first call.
Answering a Call on Another Line
1. Press
HOLD
to place the first call on
hold.
2. Press the flashing
LINE
to answer the
incoming call.
3. To switch back to the first call, press
HOLD
to place your current call on hold.
4. Press the other
LINE
to return to the first
call.
MAKING A CONFERENCE
CALL
1. Make or answer a call.
2. Press
HOLD
, then make or answer a call
on another line.
3. When the second call is connected,
press
CONF
. The lines are immediately
connected.
4. To end the conference call, hang up.
Both parties are disconnected, or you
can press a
LINE
if you wish to continue
with the call on that line. The party on
the other line is disconnected.