Filter
Top Products
8
1. Drill two holes 3
5
/
16
inches apart. Then
thread a screw into
each hole, letting the
heads extend about
3
/
16
inch from the
wall.
2. Plug one end of the supplied mod-
ular cord into the
TEL.LINE
jack on
the back of the base.
3. Route the modular cord through
the right slots on the bottom of the
base.
3
/
16
3
5
/
16
4. Insert the supplied AC adapter’s
barrel plug into the
DC IN 9V
jack
on the back of the base.
5. Route the adapter’s cord through
the slot on top of the base and
through the left slots on the bot-
tom of the base.
6. Align the keyhole slots with the
mounting screws and slide the
base downward to secure it.
7. Plug the modular cord into a mod-
ular phone line jack.
43-1087.fm Page 8 Tuesday, August 17, 1999 2:46 PM