Filter
Top Products
7
3. Insert the supplied AC adapter’s
barrel plug into the
DC IN 9V
jack
on the back of the base.
4. Route the adapter’s cord through
the slot on top of the base and
through the left slots on the bot-
tom of the base.
5. Plug the short modular cord into
the wall plate jack.
6. Align the base’s keyhole slots with
the wall plate studs and slide the
base downward to secure it.
7. Press and lift out the handset
holder, rotate it 180°, then snap it
back into place so it holds the
handset.
8. Plug the adapter into a standard
AC outlet. The POWER indicator
on the base lights.
9. Lift the base’s antenna to a verti-
cal position.
Mounting the Base Directly
on the Wall
For this mounting method, you need
two flat-head wood screws (not sup-
plied) with heads that fit into the key-
hole slots on the bottom of the base.
43-1087.fm Page 7 Tuesday, August 17, 1999 2:46 PM