Filter
Top Products
6
3. Insert the supplied AC adapter’s
barrel plug into the
DC IN 9V
jack
on the back of the base.
4. Route the adapter’s cord through
the strain relief slot on top of the
base.
5. Plug the adapter into a standard
AC outlet. The POWER indicator
on the base lights.
6. Lift the base’s antenna to a verti-
cal position.
Strain Relief Slot
Mounting the Base on a
Wall Plate
1. Plug one end of the supplied short
modular cord into the
TEL.LINE
jack on the back of the base.
2. Route the modular cord through
the right slots on the bottom of the
base.
43-1086.fm Page 6 Tuesday, August 17, 1999 2:39 PM