Filter
Top Products
7
MOUNTING DIRECTLY
ON A WALL
Mounting the base directly on the
wall requires three screws (not sup-
plied) with heads that fit into the
base’s keyhole slots.
1. Mark the location of the mount-
ing holes using the supplied
template.
2. Drill a hole at each marked loca-
tion, then thread a screw into
each hole, letting the heads
extend
1
/
8
inch from the wall
(about the width of two stacked
pennies).
(illus)
3. Insert the supplied AC adapter’s
barrel plug into the
DC 9V
jack
on the bottom of the base.
(illus)
4. Plug one end of the supplied
modular cord into the
LINE
jack
on the bottom of the base.
(illus)
5. Align the keyhole slots with the
mounting screws and slide the
base downward to secure it.
(illus)
6. Plug the adapter into a standard
AC outlet.
7. Plug the modular cord’s other
end into a modular phone line
jack.
(illus)
43-1080.fm Page 7 Tuesday, August 17, 1999 1:51 PM