Filter
Top Products
©
2000 Tandy Corporation.
All Rights Reserved.
RadioShack is a registered trademark used by Tandy Corporation.
MOUNTING THE PHONE
Desk Mounting
Wall Mounting
(With or Without Wall Plate)
Modular
Telephone
Jack
Short
Line Cord
(supplied)
3
/
16
"(5 mm)
3
15
/
16
" (100 mm)
3
/
16
"(5 mm)
Switch to
TONE
or
PULSE
to match
the type of service you have. If you
have pulse (rotary) service, you can
switch to
TONE
during a call to use
tone services.
Note:
If you do not subscribe to any special ser-
vices, pressing
FLASH
might disconnect the call.
Press
FLASH
to produce a timed switchhook sig-
nal for special services such as Call Waiting.
Press
REDIAL
to dial the
last number dialed (up to
31 tone or 32 pulse digits).
Press to hang up.
Plug the handset cord into
the jacks on the handset
and base.
Press
VOLUME
to adjust the volume to a comfortable
listening level — normal, high, or the highest.
Press for special services
such as Call Waiting.
Set
RINGER
to
HI/LO/OFF
for a
high- or low-volume ring, or to turn
off the ringer. You can make calls
with the ringer off, and you can
receive calls if you hear another
phone on the same line ringing.
This symbol is intended to inform you
that parts inside the telephone present
a risk of electric shock.
This symbol is intended to alert you to
important operating and servicing
instructions included in the papers with
the telephone.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Note:
The USOC number of the jack to be installed is
RJ11C (RJ11W for a wall jack).
USING THE PHONE