Filter
Top Products
16
5. For each stored number, write the
person’s or company’s name next
to the appropriate location number
on the supplied MEMORY direc-
tory sticker. Use a pencil in case
you need to change the number
later. Attach the sticker to the
phone.
Note: To erase a number previously
stored, simply store a new number in
its place. Or, lift the handset and press
MEMO
twice, then press the priority di-
aling button or the speed-dial memory
location number (
0
-
9
) you want to
clear. A tone sounds.
Storing a Tone Entry with a
Memory Number
If your phone is set for pulse dialing,
you can store a tone entry so you can
easily access special services that re-
quire tone signals.
1. Lift the handset and press
MEMO
.
The TALK/BATT LOW indicator
blinks.
2. Enter the phone number for the
service you want to call.
3. Press
TONE
.
4. Enter the next number (the one
that should be sent as tone sig-
nals).
5. Press
MEMO
, then press the
desired priority dialing button (
P1
,
P2
, or
P3
) or enter the desired
speed-dial memory location (
0
-
9
).
A tone indicates that the entire
number is stored.
Entering a Pause
In some telephone systems, you must
dial an access code (
9
, for example)
and wait for a second dial tone before
you can dial an outside number. You
can store the access code with the
phone number. However, you must
also store a pause after the access
code to allow the outside line time to
connect. To do so, press
REDIAL
.
Each press enters a 4-second pause.
For a longer pause, press
REDIAL
ad-
ditional times.
Dialing a Memory Number
Follow these steps to dial a number
stored in memory.
1. Lift the handset or press
TALK
.
43-1057.fm Page 16 Tuesday, August 17, 1999 1:42 PM