Filter
Top Products
7
3. Route the adapter’s cord through
the strain relief slot on top of the
base.
4. Plug the adapter into a standard
AC outlet. The POWER indicator
on the base lights.
5. Plug the modular cord’s other end
into a modular phone line jack.
6. Fully extend the base’s antenna
and place it in a vertical position.
Mounting the Base
on a Wall Plate
1. Plug one end of a short modular
cord (such as Cat. No. 279-390,
not supplied) into the
TEL LINE
jack on the back of the base.
2. Insert the supplied AC adapter’s
barrel plug into the
DC IN 9V
jack
on the back of the base.
43-1050a.fm Page 7 Tuesday, August 17, 1999 12:56 PM