Filter
Top Products
13
Notes:
• The redial memory holds up to
32 digits, so you can redial long-
distance as well as local num-
bers.
• The redial memory also holds
pause entries. See “Entering a
Pause” on Page 15.
• The redial memory does not store
a flash entry or any digits you
press after
FLASH
(see “Using
Flash.”).
USING FLASH
FLASH
performs the electronic equiva-
lent of a switchhook operation for spe-
cial services, such as Call-Waiting.
For example, if you have call waiting,
press
FLASH
to answer an incoming
call without disconnecting the current
call. Press
FLASH
again to return to
the first call.
Note: If you do not have any special
phone services, pressing
FLASH
might
disconnect the current call.
USING TONE SERVICES
ON A PULSE LINE
Some special services, such as bank-
by-phone, require tone signals. If you
have pulse service, you can still use
these special tone services by follow-
ing these steps.
1. Be sure
P
• •
T
is set to
P
.
2. Lift the handset from the cradle or
press
TALK
.
3. Dial the service’s main number.
4. When the service answers, press
TONE
. Any additional numbers
you dial are sent as tone signals.
5. After you complete the call, return
the handset to the cradle or press
TALK
. The phone automatically
resets to the pulse mode.
43-1036.fm Page 13 Tuesday, August 17, 1999 9:52 AM