Filter
Top Products
13
Notes:
• If the telephone rings while you are
storing numbers, you can answer
the call by lifting the handset or
pressing
SPEAKER
. If you answer a
call before pressing the memory
button for the number you were stor-
ing, you must start again from Step
3 after the phone call.
• If you make a mistake while storing
a number, return
NORM/STORE
BATT TEST
to
NORM
then reset it to
STORE BATT TEST
. Then re-enter
the number. Or, lift the handset then
return it to the telephone base and
re-enter the number.
You cannot delete a stored number, but
you can store a new number in its place.
Dialing a Memory Number
To dial a number stored in memory, lift
the handset or press
SPEAKER
. When
you hear a dial tone, press the memory
button for the number you want to dial.
Chain-Dialing Memory
Numbers
For quick recall of numbers for special
services (such as alternate long distance
or bank by phone), store each group of
numbers in its own memory location.
Dial the service’s main number first.
Then, at the appropriate place in the call,
press the memory button where the addi-
tional information is stored.
Note: We recommend you do not store
private or secure numbers, such as
PINs.
Testing Stored Emergency
Numbers
If you store an emergency service’s
number (police department, fire depart-
ment, ambulance) and you choose to
test the stored number, make the test
call during the late evening or early
morning hours to avoid peak demand pe-
riods. Also, remain on the line to explain
the reason for your call.
43-637.fm Page 13 Friday, August 13, 1999 10:45 AM