Filter
Top Products
6
To prevent the loss of stored numbers
when the batteries are removed, replace
the batteries within 5 minutes.
Set
NORM/STORE BATT TEST
back to
NORM
.
SELECTING A LOCATION
You can place the phone on a desk top
or table, or mount it on a telephone wall
plate or directly on the wall. Select a lo-
cation that is:
• Near a telephone line jack
• Out of the way of normal activities
• Near an AC outlet (
only
if you use
an optional AC adapter; see “Con-
necting an Optional AC Adapter” on
Page 8)
Notes:
• Your telephone connects directly to
a modular telephone line jack. If
your phone line jack is not a modu-
lar jack, you can update the wiring
yourself, using jacks and adapters
available at your local RadioShack
store. Or, you can let the phone
company update the wiring for you.
• The USOC number of the jack to be
installed is RJ11C (RJ11W if you
want to mount it on a wall plate).
Placing the Phone on a
Desk Top
Plug one end of the supplied long modu-
lar cord into the
TEL LINE
jack on the
back of the phone. Then plug the other
end into a modular phone line jack.
Mounting the Phone on a Wall
You can mount your telephone on a wall
plate, or you can mount it directly on the
wall using two screws (not supplied) with
heads that fit into the keyhole slots on
the bottom of the telephone.
Note:
If you are mounting the phone di-
rectly on the wall, drill two holes 3
15
/
16
inches (100 mm) apart. Thread the two
screws into the wall, letting the heads
extend about
1
/
8
inch (3 mm).
1
/
8
3
15
/
16
43-637.fm Page 6 Friday, August 13, 1999 10:45 AM