Radio Shack Desktop Phone Telephone User Manual


 
6
Operation
answer another call on the same line by
pressing
FLASH
, press
FLASH
again to alter-
nate between the two calls.
Note:
If you do not have Call Waiting, press-
ing
FLASH
might disconnect current call.
USING TONE SERVICES ON
A PULSE LINE
Some special services, such as bank by
phone, require tone signals. If you have
pulse service, you can still use these special
tone services by following these steps.
1. Set
TONE/PULSE
on the back to
PULSE
,
then call the special service.
2. When the service answers, press
*
.
3. Any additional numbers you dial are
sent as tone signals.
4. Follow the normal procedures for the
special service you are using.
5. When you complete the call, place the
handset on the base to disconnect the
call. The phone automatically resets to
the pulse mode.
MEMORY DIALING
There are two direct memories (
M1
and
M2
)
and ten indirect memory locations (
0
9
) for
storing frequently used phone numbers.
The phone does not need batteries for back-
up memory. If the telephone line is discon-
nected, the phone retains numbers in
memory for up to 2 minutes.
Storing Numbers Into Direct
Memories
Follow these steps to store numbers into the
two direct memory locations:
1. Pick up the handset.
2. Press
STORE/MUTE
. The STORE/MUTE
indicator
flashes.
3. Press the direct memory location key
(
M1
or
M2
).
4. Dial the number you want to store in
memory (up to 21 digits).
5. Press
STORE/MUTE
. The STORE/MUTE
indicator
turns off. Return the handset to
the cradle.
Storing a Phone Number Into an
Indirect Memory
1. Pick up the handset.
2. Press
STORE/MUTE
so the STORE/
MUTE indicator flashes.
3. Press
MEMORY,
then enter the desired
memory location (
0
9
).
4. Dial the number you want to store in
memory (up to 21 digits).
5. Press
STORE/MUTE
so the STORE/
MUTE indicator
turns off. Return the
handset to the cradle.
Dialing a Memory Number
1. Pick up the handset.
2.
To dial a number from a direct memory,
press
M1
or
M2
.
To dial a number from an indirect mem-
ory,
press
MEMORY
then
0–9.
Using The Memory Card
To keep a record of numbers you have
stored in the phone’s direct and indirect
memories, lift off the clear plastic cover over
the memory card, then write the person’s or
company’s name next to that number on the
memory card. There is also a quick refer-