Filter
Top Products
16
Preparation
MOUNTING THE CID
You can place the CID directly on a flat
surface with the supplied stand. Or, you
can mount it on a wall.
Follow these steps to mount the CID on a
wall.
1. Turn the CID over, then press in the
upper tabs and remove the stand.
2. Select a location near the phone line
jack and mark the mounting screw
locations 2
3
/
4
inch (69 mm) apart on
the wall.
3. Drill two
1
/
8
-inch (3.5 mm) holes in the
wall at the marked locations.
4. Thread a screw into each hole until
the head extends
1
/
8
-inch (3.5 mm)
from the wall.