Filter
Top Products
Operation
14
ADJUSTING THE HANDSET RINGER
AND EARPIECE VOLUME
Handset Ringer Tone and Volume
Press # or $ in standby mode to select one of five
ringer tones and volume combinations.
Earpiece Volume
Press # or $ repeatedly during a call to change
the earpiece volume of the handset. This setting will
remain in effect after the telephone call has
ended.Ô
Temporarily Mute Ringer
If the handset is off the base, simply press end to
temporarily mute the incoming ring. The ringer will
sound with the next incoming call.
REDIAL
The PAUSE/RDL key redials the last number dialed.
The redialed number can be up to 32 digits long.
TONE DIALING SWITCH-OVER
Some telephone companies use equipment that
requires pulse dialing (sometimes referred to as
rotary dialing). If you need to enter tone dialing
digits, you can switch-over to tone dialing during the
To
redial
1)Pick up the handset.
2)Press talk/FLASH.
3)Listen for the dial
tone.
4)Press PAUSE/RDL.
OR
1)Pick up the handset.
2)Press PAUSE/RDL,
then press talk/
FLASH.
1)Press talk/FLASH.
2)Listen for the dial
tone.
3)Press PAUSE/RDL.
OR
Press PAUSE/RDL,
then press talk/
FLASH.
Action Handset On Base Handset Off Base
Ô NOTE Ô
When you press # in
Maximum mode or $ in
Low mode, an error tone
sounds.
43-3827/3870.FM Page 14 Monday, June 2, 2003 11:02 AM