Filter
Top Products
8
75+0)"/76'
To talk to someone on your end of the phone without the
caller hearing your conversation, hold down
MUTE
. Release
MUTE
to resume your conversation.
75+0)"(.#5*
FLASH
performs the electronic equivalent of a switchhook
operation for special services, such as Call Waiting.
For example, if you have Call Waiting, press
FLASH
to
answer an incoming call without disconnecting the current
call. Press
FLASH
again to return to the first call.
±
75+0)"4'&+#.
Pick up the handset, press
REDIAL/PAUSE
when you hear a
dial tone. The number scrolls across the display, and the
phone dials it.
±
75+0)"2#75 '
In some telephone systems, you must dial an access code
(9, for example) and wait for a second dial tone before
dialing an outside number. When you manually dial a
number, or when you store a number in memory, you can
have your telephone pause anywhere during the dialing
sequence. Simply press
REDIAL/PAUSE
at the desired
location.
When you redial or memory dial a number, the telephone
pauses for about 4 seconds at the pause entry. For longer
pauses, press
REDIAL/PAUSE
again.
5614+0)"#"07/$'4"+0"/'/14;
The telephone can store up to 13 phone numbers in
memory (3 emergency numbers, and 10 standard memory
numbers).
1. Lift the handset.
2. Press
STORE
,
IJEH;
IJEH;IJEH;
IJEH;
appears on the display.
3. Enter the number to be stored. The number appears on
the display.
4. Press
STORE
again.
IJEH;
IJEH;IJEH;
IJEH;
and
C;Cý
C;CýC;Cý
C;Cý
appear on the
display
5. Enter the desired memory location for the number. To
store the number in an emergency memory location,
±
"016'"
±
"
Using Flash
If you do not have any special
phone services, pressing FLASH
might disconnect the current call.
Using Redial
The redial memory holds up to 32
digits, so you can redial long
distance as well as local phone
numbers.