Filter
Top Products
13
Telephone Operation
Chain-Dialing Service Numbers
For quick recall of numbers for special
services (such as alternate long distance or
bank by phone), store each group of
numbers in its own memory location. To use
the stored special service information, dial
the service’s main number first. Then, at the
appropriate place in the call, press
MEM
and
enter the memory location number (
0
–
9
) for
the stored information.
Testing Stored
Emergency Numbers
If you store an emergency service’s number
(police department, fire department,
ambulance) and you choose to test the
stored number, make the test call during the
late evening or early morning hours to avoid
peak demand periods. Also, remain on the
line to explain the reason for your call.
USING A HEADSET
You can talk with hands-free convenience
using an optional headset that has a
3
/
32
-inch
(2.5-mm) plug. Contact your local
RadioShack store for a suitable headset.
To connect the headset, open the rubber
cover on the side of the handset, then insert
the headset’s plug into the jack.
Notes:
• Connecting a headset disconnects the
handset’s earpiece and microphone.
•
VOLUME
on the handset also controls
the connected headset’s volume.
• If you place the handset on the base to
recharge it while the headset is
connected, be sure the handset seats
properly.
• With a headset connected, you make or
answer calls as usual using the keys on
the handset.
• You can use an optional handset holder
(available from your local RadioShack
store) to hang the handset on your belt
for greater convenience.
• When you finish using the headset,
disconnect it from the handset and close
the rubber cover to protect the jack.