Filter
Top Products
15
USING TONE SERVICES
ON A PULSE LINE
Some special services, such as bank by
phone, require tone signals. If you have
pulse service, you can still use these
special tone services by following these
steps.
1. Be sure
TONE/PULSE
is set to
PULSE.
2. Dial the service’s main number.
3. When the service answers, press
. Any additional numbers you dial
are sent as tone signals.
4. The phone automatically resets to
pulse dialing when you hang up.
Illustration,
TONE/PULSE
Illustration,
*
43-999.fm Page 15 Tuesday, August 17, 1999 8:28 AM