Filter
Top Products
11
• When replacing the batteries, have fresh ones on
hand before you begin. If you do not install the
new batteries within about 2 minutes after remov-
ing the old ones, you will lose all the information
stored in the system.
1. Make sure the system is unplugged from the tele-
phone line. If you are
replacing
the batteries,
unplug both modular line cords from the back of
the system.
2. Use a Phillips screwdriver to loosen the screw on
the battery compartment cover.
3. Slide the battery compartment cover off, then
remove it.
4. Put four fresh AAA batteries into the compart-
ment as indicated by the polarity symbols (+ and
–) marked inside.
5. Close the cover and secure it with the screw. If
you are replacing the batteries, reconnect the
phone line and the phone.
When
BATT appears or the display dims, replace the
batteries.
43-931A.fm Page 11 Monday, January 15, 2001 9:14 AM