Filter
Top Products
7
3. Press a plastic anchor into the
hole at each bottom mark and tap
the anchor into the wall with a
hammer until the anchor is
seated.
4. Carefully pull the paper template
away from the wall to remove it.
Note: If you are mounting the
phone directly over the modular
phone jack, plug the phone cord
plug into the jack now (see “Con-
necting the Phone”).
5. Place the phone against the wall
so the phone’s mounting holes
align with the mounting locations
in the wall, then insert a self-tap-
ping screw into each mounting
hole and tighten the screw with a
screwdriver.
For additional stability, you can also
use the supplied rubber spacers in ad-
dition to the screws. After you insert
the screws through the phone’s mount-
ing holes, place a rubber spacer over
each screw, so the spacer is between
the back of the phone and the wall,
then place the phone against the wall
PaperTemplate
Paper Template
COUNTRY LIFE
PHONE
1
2
3
4
5
7
8
9
0
#
6
M
N
O
L
K
J
I
H
G
D
E
F
A
B
C
P
R
S
T
U
V
W
X
Y
43-860.fm Page 7 Monday, August 16, 1999 1:10 PM