Filter
Top Products
9Operation
You can store a single switchhook signal
in memory at the beginning of an exten-
sion. Then, when a call comes in asking
for the person at that extension, you can
transfer the call with the push of a single
button.
USING PAUSE
In some telephone systems, you must
dial an access code (9, for example) and
wait for a second dial tone before dialing
an outside number. When you manually
dial a number, or when you store a num-
ber in memory, you can have your tele-
phone pause anywhere during the
dialing sequence. Simply press
PAUSE
at the desired location.
When you redial or memory dial a num-
ber, the telephone pauses for about 3.6
seconds at the pauses entry. For longer
pauses, press
PAUSE
more than once.
Each pause entry counts as one digit in
memory.
USING SPECIAL TONE
SERVICES
Some computer services, such as alter-
nate long-distance and bank-by-phone,
require tone signals for communications.
If you have pulse service, you can still
use these special tone services by fol-
lowing these steps.
1. Connect to the special service using
pulse dialing.
2. When the special service answers,
set
T/P
to
T
.
3. When you complete the call, hang
up the handset and set
T/P
back to
P
.
MEMORY DIALING
The telephone can store up to 20 phone
numbers in memory. Follow these steps
to store a number in memory.
1. With the handset off hook or the
speakerphone on, press
STORE
.
2. Enter the telephone number, then
press
STORE
.
3. Press the desired memory location
button.
4. Use a pointed object, such as a
straightened paper clip, to pry up
the plastic cover from over the
memory index card. Write the num-
ber you stored next to the memory
location button, then replace the
plastic cover.
To dial a stored number, press the
memory location button for the number.
Chain-Dialing Service Numbers
For quick recall of numbers for special
services (such as bank by phone), store
each group of numbers in its own mem-
ory location.
Dial the service’s main number first.
Then, at the appropriate place in the
call, press the memory location button
for the location where the additional in-
formation is stored.
43-3601.fm Page 9 Monday, April 10, 2000 5:53 PM