Filter
Top Products
10
CONNECTING THE AC ADAPTER
The AC adapter must be connected for the System 420 to op-
erate.
Note:
You must also keep batteries in the system to protect
the information stored in memory during power failures.
Cautions:
• You must use an AC adapter that supplies 9 volts DC
and at least 50 milliamps. Its center tip must be set to
negative, and its plug must correctly fit the system’s
DC
9V
jack. The supplied adapter meets these specifica-
tions. Using an adapter that does not meet these specifi-
cations could damage the system or the adapter.
• Always connect the AC adapter to the system before you
plug it into the AC outlet, and unplug the adapter from
the AC outlet before you unplug it from the system.
Follow these steps to connect the supplied AC adapter.
43-971.fm Page 10 Monday, August 16, 1999 4:12 PM