Filter
Top Products
20
Note: Some answering machines block Caller ID informa-
tion from the System 360. If this happens, you might have to
disconnect the answering machine.
MOUNTING THE SYSTEM
You can place the System 360 directly on a desk, shelf, or
table, or mount it on a wall using the supplied mounting
bracket and screws.
Follow these steps to mount the system on a wall.
1. Select a location near the
phone line jack. Then, using
the round holes in the
mounting bracket as a tem-
plate, mark the mounting
screw locations on the wall.
2. Drill two holes about
1
/
8
inch in diameter in the wall at the
marked locations.
(illustration)
43-980.fm Page 20 Monday, August 16, 1999 4:44 PM