Filter
Top Products
9
INSTALLING BATTERIES
The System 240 is powered by three AAA batteries. For the longest operation,
we recommend you use alkaline batteries (RadioShack Cat. No. 23-555). Follow
these steps to install the batteries.
Note:
If you are replacing the batteries, unplug the module from the phone line.
1. Press down and slide off the battery compartment cover in the direction of
the arrow.
2. Place the batteries in the compart-
ment, following the correct polarity (+
and –) as marked inside the compart-
ment. The call indicator on the front of
the module lights and a test screen
appears. The indicator turns off when
the total memory capacity appears
briefly. Then the screen goes blank.
3. Replace the cover.
+ AAA15V
AAA15V +
+ AAA15V
+
+
+
43-962A.fm Page 9 Monday, August 16, 1999 3:33 PM