Filter
Top Products
2
Installing SoundPoint
®
IP 600 SIP
This section provides basic installation
instructions and information for obtaining
the best performance with the SoundPoint
IP
®
600 SIP telephone. If you require
additional information or assistance with
your new telephone, please contact your
System Administrator.
The SoundPoint
®
IP 600 SIP User Guide
includes regulatory compliance infor-
mation that your System Administrator
should review and can also be found at
http://www.polycom.com.
Connecting Network and Power Source
AC Power Option
Connect the supplied Network cable
between the LAN jack on the telephone
and the LAN port on the wall or hub/switch
device port. Connect the DC plug on the
AC wall adapter to the DC jack marked on
the telephone.
In-Line Power Option
If the telephone is connected to a compatible
Ethernet switch that can provide in-line
power, the telephone will use that power
option. Simply plug the supplied Net-
work cable between the LAN jack on the
telephone and an available Power and Data
port on the In-Line Power switch.
Cisco™ Catalyst™ In-Line
Power Switch
IEEE 802.3af compliant
In-Line Power switch
(Optional)