Filter
Top Products
Configuring Your System
4 - 37
Configuration File Example
The following excerpt from the sip.cfg configuration file shows an example
where downloaded entries are limited to any where the phone number is in
the 604 area code:
dir.corp.address=”
dir.corp.port=”389”
dir.corp.transport=”TCP”
dir.corp.baseDN=”cn=Users,dc=yourcompany,dc=local
dir.corp.user=”ldapadmin”
dir.corp.password=”12345678”
dir.corp.filterPrefix=”(objectclass=person)”
dir.corp.scope=”sub”
dir.corp.attribute.1.name=”sn”
dir.corp.attribute.1.label=”Last Name”
dir.corp.attribute.1.type=”last_name”
dir.corp.attribute.1.filter=””
dir.corp.attribute.1.sticky=”0”
dir.corp.attribute.2.name=”givenName”
dir.corp.attribute.2.label=”First Name”
dir.corp.attribute.2.type=”first_name”
dir.corp.attribute.2.filter=””
dir.corp.attribute.2.sticky=”0”
dir.corp.attribute.3.name=”telephoneNumber”
dir.corp.attribute.3.label=”Phone Number”
dir.corp.attribute.3.type=”phone_number”
dir.corp.attribute.3.filter=”604”
dir.corp.attribute.3.sticky=”0”
dir.corp.backGroundSync=”0”
dir.corp.backGroundSync.period=”86400”
dir.corp.viewPersistence=”1”
Recording and Playback of Audio Calls
SoundPoint IP phones that have a USB port can be configured to allow
recording of audio calls on a supported USB device. Only the SoundPoint IP
650 and 670 have a functioning USB port.
The filenames of the recorded .wav files will include a date/time stamp (for
example, 20Apr2007_190012.wav was created on April 20, 2007 at 19:00:12).
An indication of the recording time remaining—the space available of the
attached USB storage media—appears on the graphic display. The user can
browse through all recorded files through the menu shown on the graphic
display.
Note
This feature requires a license key for activation. Using this feature may require
purchase of a license key or activation by Polycom channels. For more information,
contact your Certified Polycom Reseller.