Filter
Top Products
To answer with the speakerphone, press or tap
Answer. To answer with the handset, pick up the
handset. To answer with a headset, press .
To answer a new call while on an active call, tap Answer.
The current call will be held.
To end an active call, replace the handset, press , or
press . Or, tap End Call.
To end a held call, navigate to Calls view and highlight
the held call. Tap Resume, and tap End Call.
From Lines, Calls, or Active Call view, tap Hold. If you’re
in Calls view, remember to highlight the call first.
To resume a held call, tap Resume from either Lines or
Calls view.
From Lines, Calls, or Active Call view, tap Transfer, and
call the other party. When you hear the ringback sound,
or after you talk with the other party, tap Transfer.
To enable call forwarding, tap Forward from Home or
Lines view. Tap the forwarding type to enable, type a
forwarding number, and tap Enable.
To disable call forwarding, tap Forward from Home or
Lines view, tap the forwarding type to disable, and tap
Disable.
To enable per-call forwarding: As your phone rings, tap
Forward, enter the forwarding number, and tap
Forward.
Call the first party, and after the call connects, tap
Confrnc. Then, dial and connect with the second party
and tap Confrnc again.
From Lines or Calls view, you can:
Tap Hold to hold all participants.
Tap End Call to remove yourself from the call, but
keep the other participants connected.
Tap Manage to manage each participant.
Tap Split to end the conference and hold all
participants.
Timesaver: Placing Conference Calls
If you have an active and held call, tap Join to
set up a conference.
Favorites are contacts you want quick access to. Your
Favorites list displays all your Favorites. A smaller
number of Favorites displays in Lines view, and when you
tap the phone Line from Home view.
To view your Favorites list—Tap New Call from
Home view, and tap Favorites.
To make a contact a Favorite—Navigate to your
Contact Directory and tap the contact. Tap Add to
Favorites, and tap Yes to confirm.
To dial a Favorite—Tap the Favorite from Home or
Lines view, or from your Favorites list.
To reorder your Favorites list—Update the contact’s
Favorite Index number in the Contact Directory.
To view your Recent Calls list, tap Directories from
Home view, and tap Recent Calls.
From the Recent Calls list, tap to sort and order calls,
tap to display only certain calls, or tap a call record
to call the person.
Timesaver: Viewing Recent Calls
Tap from Lines, Calls, or Active Call view.
Tip: Saving Recent Callers to Your Directory
From your Recent Calls list, tap next to the
call, and tap Save. Enter additional information
and tap Save.
To view your Directory—Tap Directories from
Home view, and tap Contact Directory.
To add a contact—Navigate to your Contact Directory
and tap . Type the contact’s information, and tap
Save. To make a contact a Favorite, enter a
Favorite Index number.
To update contact information—Navigate to your
Contact Directory and tap the contact. Tap ,
update the contact’s information, and tap Save.
To delete a contact—Navigate to your
Contact Directory and tap the contact. Tap , and
tap Yes to confirm.
To search for a contact—Navigate to your
Contact Directory and tap Search. Enter search
criteria, and tap Search.
To dial a contact from your Directory—Navigate to
your Contact Directory and tap the contact. From the
contact’s information screen, tap the contact’s phone
number.
Tap Messages from Home view, and tap
Message Center. Tap Connect and follow the prompts.
Timesaver: Accessing Your Message Center
Tap from Lines, Calls, or Active Call view.
During a call, press so other parties can’t hear you.
To disable Mute, press again.
If you have a service that supports Do Not Disturb, you
can enable or disable ringing. To enable or disable
ringing, tap DND from Home or Lines view. When Do Not
Disturb is enabled, the DND icon, , displays in the
status bar.
If you have a VVX 600, you can tap to disable DND.
To change call volume, press during a call. To
change the ringer volume, press when the
phone is idle or ringing.
To change the incoming call ringtone, tap Settings from
Home view, and tap Basic > Ring Type. Tap the ringtone
you want.
To set a ringtone for a contact, navigate to your
Contact Directory and tap the contact. Tap , update
the contact’s Ring Type, and tap Save.
Your phone may be set up to receive video. If a Polycom®
VVX® Camera is attached to your phone, you can send, as
well as receive, video. You can exchange video with only
one person at time.
If video is enabled on your phone, you can:
View video on the full screen—Tap . To exit full
screen mode, tap . (If the icon doesn’t display, tap
the screen to see it.)
If a VVX Camera is attached to your phone, you can tap
Video and do the following:
Tap Stop Video to stop sending video. To start sending
video again, tap Start Video.
Tap Swap to switch where video displays.
To stop sending video for all calls:
Tap Settings from Home view, and tap Basic > Video >
Video Call Settings. Tap Auto Start Video Tx, and
disable the setting. When disabled, your phone won’t
automatically transmit video at the start of all calls.
To automatically view all incoming video on the full
screen (if you have a camera or not):
Tap Settings from Home view, and tap Basic > Video >
Video Call Settings. Tap Auto Video Full Screen,
enable the setting, and tap Save.