Filter
Top Products
32
Modications
In accordance with Part 15 of the FCC
Rules, the user is cautioned that any
changes or modifications not expressly
approved by Polycom, Inc. could void the
user’s authority to operate the equipment.
Installation must be
performed in accordance with all relevant
national wiring rules.
L’Installation doit être exécutée confor-
mément à tous les règlements nationaux
applicable au filage électrique.
Plugs Acts as Disconnect Device
The socket outlet to which this apparatus
is connected must be installed near the
equipment and must always be readily
accessible.
La prise électrique à laquelle l’appareil
est branché doit être installée près de
l’équipement et doit toujours être facile-
ment accessible.
Industry Canada (IC)
This Class [B] digital apparatus complies
with Canadian ICES-003.
Cet appareil numérique de la classe [B]
est conforme à la norme NMB-003 du
Canada.
Class B Digital Device or
Peripheral
Note: This equipment has been tested and
found to comply with the limits for a Class
B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed
to provide reasonable protection against
harmful interference in a residential instal-
lation. This equipment generates, uses, and
can radiate radio frequency energy and, if
not installed and used in accordance with
the instructions, may cause harmful inter-
ference to radio communications. How-
ever, there is no guarantee that interference
will not occur in a particular installation. If
this equipment does cause harmful interfer-
ence to radio or television reception, which
can be determined by turning the equip-
ment off and on, the user is encouraged
to try to correct the interference by one
or more of the following measures:
1. Reorient or relocate the receiving
antenna.
2. Increase the separation between the
equipment and receiver.
3. Connect the equipment into an out-
let on a circuit different from that
to which the receiver is connected.
4. Consult the dealer or an
experienced radio/TV technician
for help.
2. This device must accept any
interferences received, including in-
terference that may cause undesired
operation.
Installation Instructions