Polycom GCN100 Telephone User Manual


 
SpectraLink Corporation NetLink e340/h340/i640 Wireless Telephones and Accessories User Guide
Part Number: 72-1004-01-J.doc
Page 11
System Feature Activation
The features that have been programmed in your system may be
viewed and activated through the Shortcut Menu and Softkey
Functions. See the Appendices for variations when protocols other
than SRP are used.
View Shortcut menu*
System features that are accessible by the NetLink Wireless
Telephone may be viewed by going off hook (pressing the
Start Call
key) and then pressing the
MENU key. A feature menu displays in
the Main display area. This is the Shortcut Menu.
The Shortcut Menu lists the feature shortcut, if any, and the feature
description. As you scroll through the features by pressing the
Up
and
Down buttons, the feature abbreviation is highlighted in the
softkey function display area. To activate a feature, you may press its
softkey, its shortcut key, or the
Select button while the option is
highlighted.
Using the Select button
To use the
Select key, press Up or Down to highlight an option, then
press
Select to activate the feature.
Using the Shortcut keys
Programmed features may have the number 1-9, *, 0, or # in the
left column of the Shortcut Menu. This designates the shortcut key
that activates that feature. To activate the feature using its shortcut
key, press the shortcut key at any time while in the Shortcut Menu.
The feature will activate whether or not that feature is currently
displayed or highlighted. No shortcut indicates that the feature does
not have a shortcut and this is generally the case with primary level
softkey functions.
Example:
If the Transfer feature is programmed to shortcut key 2, the
Shortcut Menu will display
2 Transfer
When the Transfer option is highlighted in the menu,
Xfr will be
highlighted in the softkey function display area.
To activate the Transfer feature, press
2.
You may also press the corresponding softkey.
Alternately, you may scroll to the option and press
Select.
If you are not already scrolling through the Shortcut Menu, simply
press
MENU + 2 to activate the Transfer feature.
* See the Appendices for variations when protocols other than SRP are used.