Extended Microphones
Remote Keypad
Wireless Microphone
System Specifications
SoundStation Premier Full Duplex Conference Phone and Wireless Microphone User’s Guide SoundStation Premier Full Duplex Conference Phone and Wireless Microphone User’s Guide
THE SOUNDSTATION Premier Full Duplex Conference
Audio Bandwidth
Loudspeaker Volume
Network Interface
Power Requirements
Console
Power Supply/
Telephone Interface
Environmental
Requirements
Recommended Room
Conditions
Registration
200 to 3500 Hz
89dBSPL
Two-wire RJ-11 analog PBX or Public Switched
Telephone Network interface
Size:
Weight:
Wall Module
Power: 90-130VAC, 50/60 Hz, 30W
Dimensions:
Cable Length: 25' to console, 10' to telephone wall jack
Weight:
Auxiliary Input/Output (auto-sensing) RCAJ a c k
O u t p ut: Line level to tape recorder
Universal Module
Power: 200-260VAC, 50/60 Hz, 25W
Dimensions:
Cable Length: 25' to console, 10' to telephone wall jack
Weight:
R C AJack; Line level to tape recorder
O u t p ut: Line level to tape recorder
Te m p e r a t u r e :
H u m i d i t y :
Reverberation time: < 0.4 seconds
Noise level: < 48 dBA
UL, FCC, Canada
Specifications
Dimensions:
Weight:
Cabling: Two-wire RJ9, 8 feet
Dimensions:
Weight:
Batteries: 2, A A AA l k a l i n e
typical power __________
Overall System Performance
Frequency Response: 200 to 3400 Hz
Dynamic Range: 120 dB (max. SPL to A-weighted
noise level)
Harmonic Distortion: < 0.3%
RF Carrier Frequency: 171.905 MHz and 203.4 MHz
Frequency Stability: ±.005%, crystal controlled
Modulation: FM / ±15 KHz
Maximum Operating Range: 50 to 200 feet
Wireless VHFReceiver
Controls: Mute adjust
Audio output: 600 ohm unbalanced
Connectors: Audio output; RCA jack. Power
input; 3.5 mm jack
Indicators: Low battery and transmitter “TX”
Mute: Externally adjustable; 1µV
preset minimum
Unwanted Signal Rejection: 60 dB image and spurious
Power Requirements: Single 9 V alkaline, internal, or 9 V
DC power adapter
FCC ID: Registration # CKT 78E 151VR
THE SOUNDSTATION Premier Full Duplex Conference
FPO