Filter
Top Products
1725-36127-001-F.doc
6
Installing Flush Against a Wall
or Hard Ceiling
Items provided: Outdoor enclosure, Base Station
Items needed: 4 anchor bolts (length and type depends on
wall or ceiling material Base Station is being
mounted to)
1. Mark and drill four holes into the wall or ceiling, using the
mounting flanges of the outdoor enclosure as a guide.
2. Mount outdoor enclosure to wall or ceiling using anchor bolts.
The outdoor enclosure can be mounted with the compression
fitting in any direction.
3. Slide the Base Station cable through the compression fitting
and tighten fitting.
Compression
fittin
g
1