Filter
Top Products
Polycom Kirk 5020-5040 User Guide Advanced...
66 Polycom, Inc.
7 If required, enter an AC Code and press Ok to connect to the system.
8 Press Ok.
Note: If the handset is already subscribed to 15 systems, you will have to
remove a subscription before creating a new subscription (refer to “Removing
a Login” on page 65).
Selecting Login Automatically
When auto login is turned on, the handset automatically change to another
system when necessary. Auto login should only be used when systems are
separate, with no overlaps.
Note: To activate auto login your handset must be subscribed to at least
two systems.
1 Press Menu to enter main menu.
2 Scroll to Settings and press Select.
3 Scroll to Advanced and press Select.
4 Scroll to Login and press Select.
5 Scroll to Auto login and press Select.
6 If Off is selected, press Change to select On.
The handset automatically selects a system. The selected system is
marked with an A.
Time & Date
Note: When you turn off the handset, the settings of time are deleted if the
subscribed system does not resend the information to the handset.
Choose Time Format
1 Press Menu to enter main menu.
2 Scroll to Settings and press Select.
3 Scroll to Advanced and press Select.
4 Scroll to Time & date and press Select.
5 Scroll to Time format and press Select.
6 Scroll to desired time format and press Change.
Set Time
1 Press Menu to enter main menu.
2 Scroll to Settings and press Select.
3 Scroll to Advanced and press Select.