Filter
Top Products
5
2. Battery installation
Before using the telephone it is important that you connect the battery to the connector in the battery box. Assem-
ble the back cover as described below and place the handset into the charger.
1. Push the back cover 5 mm towards the headset plug using your thumbs.
2. Lift off back cover.
3. If the battery is not already installed, place battery plug
in the slot in the battery box.
4. Insert battery with the label readable and replace cover.
Place the battery plug in the slot
with red wire closest to the mark
✱ (see figure)
1402 1600-ed11:1402 1600-ed11.qxd 11-07-2008 14:39 Side 5