Filter
Top Products
English 7
Silence while
ringing
Press the END key to silence the ring.
Change the
ring volume
Press the up/down volume buttons on the side
of the handset during ringing.
Activate or
deactivate the
speakerphone
Press the Spkr softkey and speak towards the
handset. Note that this feature may be
unavailable in your facility.
Adjust the
speaker volume
Press the up/down volume buttons on the side
of the handset during the call.
Adjust the
headset volume
Press the up/down volume buttons on the side
of the handset during the call.
Place a call on hold
Press the Hold softkey.
Resume a held call
Press the LINE key followed by the line number
key.
Mute the
microphone
Press the Mute softkey.
End the call
Press the END key. Be sure to do this at the end
of each call to return to the standby mode.
Change the profile
Press the Prof softkey and use the Nav keys to
select a new profile while in standby mode.
The selected profile is marked with an asterisk
(*).
Turn on the backlight
The backlight comes on when any key is
pressed or when there is an incoming call and
stays on for 10 seconds. It turns off after 10
seconds if another key is not pressed within
that period.
If you want to Then