Filter
Top Products
During normal operation, it takes approx-
imately 3 1/2 hours to charge the hand-
set from fully discharged to its full capa-
city. Place the handset in the charger.
When the handset is turned on, the dis-
play shows the charging status in line 3.
For correct charging be sure the room
temperature is between 0°C and 25°C.
Do not place the handset in di rect sunlig-
ht. The battery has a built-in heat sensor
which will stop charging if the battery
temperature is too high.
It is necessary to recharge the battery
when the display shows “BATTERY
LOW”, or if it can not be turned on. The
LED flashes at a low frequency while
charging and lights constantly when the
charging is finished. The display goes
back to normal mode when fully charged.
When the handset is placed in the char-
ger it will not vibrate, and B-answer is
inactive. If the battery is fully dis char ged,
up to 10 min. may pass before charging
begins and the handset can be turned
on. When the charger begins the char-
ging, status is shown in the 3rd line of
the display and the LED flashes slowly.
3
1415 0200-ed2:14473_KT_1415 0200 ed1 06-12-2007 15:2