Filter
Top Products
3
CONNECT TO YOUR PHONE
“Pairing” is the set-up process
of introducing your headset
to your phone.
Before using your headset
for the first time, you must
pair it with your Bluetooth-
enabled phone.
Pairing is a one-time process
unless your phone loses the
connection or you want to
pair a new phone.
1. READY
Activate the Bluetooth feature
on your phone, then get phone
to add/search/discover new
Bluetooth devices.
Phoneshavedifferentmenusto
selectfrom
iPhone Settings > General >
Bluetooth > On
(starts the search for devices)
BlackBerry®smartphone
Settings/options > Bluetooth: On >
Search for devices
2. SET
Firsttime,rightoutofthebox
With headset turned off, activate
Bluetooth pairing mode by
sliding Power switch on. The
LED flashes red/blue to indicate
pairing mode.
Pairingnewphone/
reconnectingoriginal
With headset turned off, slide
Power switch on. Press and
hold the Call button until the
LED flashes red/blue.
3. CONNECT
Select “PLT_MLXX” from the list of
Bluetooth devices shown on your
phone.
If phone asks for a passcode,
enter four zeros (0000). You
may see **** on screen. Some
phones also ask to confirm
headset connection after pairing.
Headset LED will stop flashing
red/blue once your phone and
headset are successfully paired/
connected.
You can now make a call using
your phone’s keypad or voice-
dialing feature.