Filter
Top Products
Optional Firmware Update (Version 1.03) for 2013 Navigation Models:
AVIC-Z150BH and AVIC-X950BH
In this manual, iPhone® 5 and iPod® touch fifth generation will be referred to as “iPhone with Lightning
connector.”
The following preparatory steps must first be undertaken in order to connect an iPhone with Lightning
connector to your AVIC-Z150BH or AVIC-X950BH and use AppRadio Mode.
A. Download the firmware update files
B. Update the firmware on your AVIC-Z150BH or AVIC-X950BH
C. Verify System Application Version
D. Pair your iPhone with Lightning connector with your AVIC-Z150BH or AVIC-X950BH and
establish a connection between your iPhone with Lightning connector and the AVIC-Z150BH
or AVIC-X950BH via Bluetooth wireless technology
E. Connect your iPhone with Lightning connector to your AVIC-Z150BH or AVIC-X950BH using
Pioneer CD-IH202 AppRadio Mode HDMI Interface Cable Kit for iPod/iPhone (sold
separately)
Once Steps A through D have been completed, the [Apps] key on the Home screen will become active,
allowing you to utilize AppRadio Mode.
IMPORTANT
• “iPod source” will no longer be available when using AppRadio Mode with an iPhone with Lightning
connector. To play music and/or video files from your iPhone with Lightning connector, please first
install the free of charge CarMediaPlayer app on your iPhone with Lightning connector and then
launch CarMediaPlayer while in AppRadio Mode.
• If you have previously paired your iPhone with Lightning connector with the AVIC-Z150BH or
AVIC-X950BH, you will have to re-register and connect your device after the firmware update has
been completed.