Philips XL370 Cordless Telephone User Manual


  Open as PDF
of 42
 
34
Listen to the announcement
1 Press MENU.
2 Select [ANSWER MACHINE] >
[ANNOUNCEMENT], then press [OK]
to conrm.
3 Select [ANSWER & REC.] or [ANSWER
ONLY], then press [OK] to conrm.
4 Select [PLAY], then press [OK] to
conrm.
You can listen to the current »
announcement.
Note
You can no longer listen to the announcement •
when you pick up an incoming call.
Delete an announcement
1 Press MENU.
2 Select [ANSWER MACHINE] >
[ANNOUNCEMENT], then press [OK]
to conrm.
3 Select [ANSWER & REC.] or [ANSWER
ONLY], then press [OK] to conrm.
4 Select [DELETE], then press [OK] to
conrm.
The handset displays a conrmation »
request.
5 Press [OK] to conrm.
6 The pre-recorded announcement is
restored.
Note
No pre-recorded announcement can be •
deleted.
Note
If the memory is full, the answering machine •
switches to [ANSWER ONLY] mode
automatically.
Announcements
The announcement is the message your caller
hears when the answering machine picks up the
call. The answering machine has 2 pre-recorded
announcements: the [ANSWER & REC.] mode
and [ANSWER ONLY] mode.
Record an announcement
The maximum length of the announcement
you can record is 3 minutes. The newly
recorded announcement automatically
replaces the old one.
1 Press MENU.
2 Select [ANSWER MACHINE] >
[ANNOUNCEMENT], then press [OK]
to conrm.
3 Select [ANSWER & REC.] or [ANSWER
ONLY], then press [OK] to conrm.
4 Select [RECORD], then press [OK] to
conrm.
5 Recording starts after the beep.
6 Press [OK] to stop recording or the
recording stops after 3 minutes.
You can listen to the newly recorded »
announcement on the handset.
Note
To restore the pre-recorded announcement, •
delete your current announcement.
Note
Ensure that you speak close to the microphone •
when you record an announcement.
EN
IFU_XL370-375_05_EN.indd 34 2010-1-15 10:56:48
 previous next