Filter
Top Products
14
4 handsets can be registered to the base station. A handset
can only be associated with 1 base station.
✦ To register another handset
First enter registration mode by unplugging and
plugging back in the power adapter to the
electricity supply.
Handsets registering / unregistering ( )
If your network operator is not the main national network operator, you may have to change the
line settings. Some of the following settings are available subject to a subscription with your operator
and also technical availability.
The options on this menu are country dependent and some may not exist in certain
countries.
To enter the following settings : or
To scroll through the menus
Press to exit the programming option.
Technical settings (country dependent)
✦ To unregister the handset you use
enter the RC code*
✦ To unregister all the handsets (except the handset you are using)
enter the RC code*
Once the menu is selected, enter the RC* code written under the base and press
to confirm.
Warning : If you wish to associate a non-Philips handset to the DECT 211 or DECT 215 base
stations, make sure that these handsets are GAP compliant otherwise they will not operate properly.
*RC code
(Registration
Code) is
written under
the base.
Warning : Once unregistered, the handset is no longer operational.
✦ Changing the dial mode
This allows you to select either DTMF tone dialling (faster dialling, access to operator services) or
pulse dialling (also called “Loop disconnect” and used in countries without DTMF capability).The
default value is TONE. (Country dependent, you may not be able to change to “Pulse”).
or to choose
TONE or PULSE
✦ Changing Caller Identification type
The Caller Identification service (Name and Number) is available subject to a subscription to your
operator (according to availability). (Country dependent)
or to choose the right setting among the list
www.philips.com/faqs/dect
DECT 215 master UK indice 1.qxd 09/03/04 13:15 Page 14