Filter
Top Products
PROGRAMMING YOUR TELEPHONE
13
KEY
FUNCTIONS
COMBINATIONS
COMMENTS
+ +
Only for U.K.
u Tone
+ +
u Pulse
+ + Code ∆ +
u Register this handset
+ + Code ∆ +
u Un-register this handset
+ + Code ∆ +
u Un-register other handset
The ∆ code is
indicated on the
label on the bottom
of the base station
(4 digits).
DIALLING MODE
For handsets from other manufacturers or for models other than the
,
please refer
to the base station user manual
.
REGISTERING/UN-REGISTERING A HANDSET TO A BASE STATION
Before registering a handset, unplug the base station mains adapter and then plug it in again.
Note: (UK only)
Although this equipment can use either loop disconnect (PULSE) or DTMF signalling (TONE),
only the performance of the DTMF signalling is subject to regulatory requirements for correct
operation. It is therefore strongly recommended that the equipment is set to use DTMF
signalling of access to public or private signalling emergency services. DTMF signalling also
provides faster call set up.
ang6523.qxd 31/05/99 15:20 Page 13