Filter
Top Products
end of a pencil. The key is designed so that it
is difficult to change the setting by accident. The
unit beeps reflecting the new volume setting. It
beeps twice to indicate the volume is turned
OFF.
If the volume is set to OFF, incoming calls will
not be announced. Calls reviewed while the
volume is OFF will be announced at medium
volume level.
Troubleshooting & FAQs
Having problems? Before contacting PHILIPS
or your dealer, check the following list of sug-
gestions. You might be able to solve the prob-
lem yourself.
Question:
My unit does not announce anything when the
phone rings.
Answers:
Make sure the volume is turned up. To turn up
the volume, press the volume control button
(small button) with your finger or a pencil eras-
er until you hear the unit “beep” at the desired
volume level. If you hear the unit beep twice,
then the volume is off.
10
EN
Operation
Troubleshooting & FAQ