Philips SHB7150 Bluetooth Headset User Manual


  Open as PDF
of 16
 
7EN
4 Use your
headset
Connect the headset to a
Bluetooth device
1 Turn on your mobile phone/Bluetooth
device.
2 Press and hold to turn the headset on.
» TheblueLEDashes.
» The headset is reconnected to
the last connected mobile phone/
Bluetooth device automatically. If the
last one is not available, the headset
tries to reconnect to the second last
connected device.
Tip
• If you turn on the mobile phone/Bluetooth device or
activate the Bluetooth feature after turning on the
headset, you have to reconnect the headset and mobile
phone/Bluetooth device manually.
Note
• If the headset fails to connect to any Bluetooth device
within range in 5 minutes, it will switch off automatically
to save the battery life.
Manage your calls and music
Call/Music button
Task Operation Sound
or LED
indicator
Turn the headset
on.
Press and
hold for 1
second.
•4 beeps
•Blue LED
ashes.
Turn the headset
off.
Press and
hold for 4
seconds.
•4 beeps
•White
LED
ashes
Play or pause
music.
Press once. N/A
Pick up/hang up
a call.
Press once. 1 beep
Reject an
incoming call.
Press and
hold for 1
second.
1 long beep
Redial the last
number.
Press twice. 2 beeps
Switch caller
during a call.
Press once 1 beep
Volume/Track control button
Adjust volume. Slide up/
down
N/A
Skip forward. Press once N/A
Skip backward. Press twice N/A
Mute/unmute the micro-
phone in a call.
Press once 1
beep
Other headset indicator status
Headset status Indicator
The headset is connected
to a Bluetooth device, while
the headset in standby
mode or while you are
listening to music.
BlueLEDashes
for every 8
seconds.
The headset is ready for
pairing.
LEDashes
blue and white
alternately.
The headset is on but not
connected to a Bluetooth
device.
BlueLEDashes
quickly.
There is an incoming call. BlueLEDashes
once per second.
Low battery. White LED
ashes.
Battery is fully charged. White LED is off.
 previous next